Raritan PCS12 Guida Utente Scaricare il pdf (Pagina 43)

Chapter 3: Prepare Raritan Devices

 Bits per second = 9600

 Data bits = 8

 Stop bits = 1

 Parity = None

 Flow control = None

Note: The “Flow control” parameter must be set to “None” to ensure

that the communications program will work correctly with the

Dominion PX.

2. Point the communications program at the serial port connecting the

Dominion PX, and open a terminal window.

3. Press the Enter key to display the opening configuration prompt.

4. Type config and press Enter to begin the configuration process.

You are prompted to select an IP configuration method.

5. You must assign the Dominion PX an IP address. There are two

ways to do this:

 Auto configuration - Select an autoconfiguration method such

as dhcp or bootp and let the DHCP or BOOTP server provide

the IP address.

 Static IP address - Select None and assign the Dominion PX a

static IP address. You will be prompted for the address, network

mask, and gateway.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 69 70

Nessun commento

Raritan PCS12 Guida Utente Pagina 43