Raritan PCS12 Guida Utente Scaricare il pdf (Pagina 27)

Chapter 3: Prepare Raritan Devices

Using a Terminal Emulation Program

You can use the Admin serial console with a terminal emulation program

like HyperTerminal to set the following configuration parameters for the

Dominion KX II-101:

• IP address

• Subnet mask address

• Gateway address

• IP access control

• LAN speed

• LAN interface mode

To use a terminal emulation program with the Dominion KX II-101, you

must first connect the included RS-232 serial cable from the Admin port

on the Dominion KX II-101 to the COM1 port on your PC. See Using the

Admin Port (on page 24).

For de

mons

tration purposes, the terminal emulation program described

in this section is HyperTerminal. You can use any terminal emulation

program.

To use a terminal emulation program to configure the Dominion

KX II-101:

1. Connect the Dominion KX II-101 to a local PC using the included

RS-232 serial cable.

Connect to the Admin port on the Dominion KX II-101 and the COM1

port on the PC.

2. Launch the terminal emulation program you want to use to configure

the Dominion KX II-101.

3. Set the following port settings in the terminal emulation program:

 Bits per second: 115200

 Data bits: 8

 Parity: None

 Stop bits: 1

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 69 70

Nessun commento

Raritan PCS12 Guida Utente Pagina 27