Raritan PCS12 Guida Utente Scaricare il pdf (Pagina 25)

Chapter 3: Prepare Raritan Devices

Configuring the Dominion KX II-101

The Dominion KX II-101 can be configured in two ways:

• Using the web-based Dominion KX II-101 Remote Console, which

requires the unit to have a network connection to your workstation.

• Using a terminal emulation program like HyperTerminal, which

requires a direct connection from the unit's ADMIN port to your

workstation. The cable for this connection is included with the

Dominion KX II-101.

This section describes both ways of configuring the Dominion KX II-101.

Using the Remote Console

The Dominion KX II-101 Remote Console is a web-based application

that enables you to configure the unit prior to use. Before configuring the

Dominion KX II-101 using the Remote Console, you must have both your

workstation and the unit connected to a network.

To configure the Dominion KX II-101, you:

• Set a new password to replace the default

• Assign an IP address

Setting a New Password

When you first log into the Remote Console, you are prompted to set a

new password to replace the default. Then you can configure the

Dominion KX II-101.

1. Log on to a workstation with network connectivity to your Dominion

KX II-101 unit.

2. Launch a supported Web browser such as Internet Explorer (IE) or

Firefox.

3. In the address field of the browser, enter the default IP address of

the unit:

192.168.0.192

4. Press Enter. The login page opens.

5. Enter the user name admin and the password raritan.

6. Click Login.

The Change Password page is displayed.

7. Type raritan in the Old Password field.

8. Type a new password in the New Password field; retype the new

password in the Confirm New Password field. Passwords can be up

to 64 characters long and can consist of English alphanumeric and

printable special characters.

9. Click Apply.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Nessun commento

Raritan PCS12 Guida Utente Pagina 25